13. Body

Specifications

Mass-dimensional characteristics

All figures are specified approximately and can change depending on model. For specification address data of the manufacturer.

Sizes and masses

See Specifications to the Head Governing bodies and methods of operation.

Control body sizes

Combo model. Bottom

Combo model. Body

The 3-door Corsa model with the engine of 1.2 l. Bottom

3-door Corsa model. Body

The 3-door Corsa model with the engine of 1.4 l. Bottom

The 3-door Corsa model with the diesel engine. Bottom

The 5-door Corsa model with l engines 1.2 and 1.4. Bottom

The 5-door Corsa model with l engines 1.2 and 1.4. Body

The 5-door Corsa model with the diesel engine. Bottom

The 5-door Corsa model with the diesel engine. Body

Tigra model. Bottom

Tigra model. Body

Adjusting sizes of the traction and hook-on device

Performance of installation of the traction coupling device is recommended to be charged to specialists of car service.

The scheme of installation of the traction coupling device on the Corsa models

A — 650 mm
B — 485 ± 5 mm
With — 161 ± 0.3 mm
D — 114 – 113,5 mm
E — 50 mm
F — 448 ± 0.3 mm
G — 485 ± 0.3 mm

The scheme of installation of the traction coupling device on the Combo models

A — 1064 mm
B — 160 ± 0.3 mm
With — 80 mm
D — 50 mm
E — 382 - 387 mm
F — 402 mm
G — 475 mm

Efforts of tightening of threaded connections, Nanometer
Bolt of fastening of a back seat belt
35
Tear up bolts of fastening a back
20
Bolts of fastening of a front seat
20
Bolts of fastening of a back seat (Corsa model) to an average support
20
to a casing of a wheel arch
30
Tighten bolts of a back of a back seat (Tigra model)
30