13:34. Removal and installation of a back seat
Corsa model
|
|
- Uncover (1) loops of a seat.
Covers of loops of a seat
- Disconnect both levels of loops and remove a back seat.
- Cast away a back seat forward and take out on the right and to the left of its guide safety hairpins (1).
Safety hairpins
- Release the screw-driver clamps on left and right directing seats and take out guides from an opening in a body.
Clamp detachment
- Take out a seatback from a guide from the luggage compartment.
|
|
Compound back of a back seat (model with 03.1993 on 08.1995 g of the issue)
|
|
- Remove an overlay (1) of a back of a back seat from the left and right side. Remove an upholstery around loops (2), having released clamps (3).
Slips (1), loops (2) and clamps (3) backs of a back seat
- Turn out fastening screws the left, right and central loop and take out a seatback.
Fastening screws loop
- Installation is carried out in the sequence, the return to removal. Bolts of fastening tighten 20 Nanometers with effort.
|
|
Compound back of a back seat (model from 05.1995 g of the issue)
|
|
- Uncover the luggage compartment.
- Cast away a half of a seatback forward.
- Turn out screws of fastening of a side slip and loops to a casing of a wheel arch.
- Cast away a half of a back back, disconnect it from an average support and take out.
- Similarly arrive with other half of a back.
- Installation is carried out in the sequence, the return to removal. Fastening bolts to an average support tighten with effort 20 Nanometers, and to a casing of a wheel arch - with effort of 30 Nanometers.
|
|
Tigra model
|
|
- Turn out bolts of fastening of forward holders of a pillow of a seat on the right and at the left. Release a framework from holders.
Bolts of fastening of holders of a pillow of a seat
- Release a framework from back holders of a pillow of a seat on the right and at the left. Remove a seat pillow.
- Disconnect on both sides a plate of a guide of a seat belt (1). Remove from two parties the holder (2) Snimite a back of a back seat.
Plate of a guide (1) and holder (2) seat belts
- Establish a seat pillow in holders. Fix forward holders.
- Tighten seatback bolts with effort of 30 Nanometers.
|
|