13:33. Removal and installation of a front seat

Cars from 09.1998 g of the issue can be equipped with a side safety cushion. The side safety cushion is built in from outer side of a seatback of the driver and the forward passenger. The seats having a side safety cushion are designated by white stripes with the inscription "AIRBAG" of red color. At operation of a side safety cushion covering of a seat is broken off on a seam and releases a pillow.

Cars from 09.1998 g of release can be completed with the side safety cushion which is built in on each side seatbacks of the driver and forward passenger. Seats with a side safety cushion are marked with white stripes with the red inscription "AIRBAG". At operation of a side safety cushion the upholstery of a seat is broken off on a seam and releases a pillow. Observe security measures at the address with SRS system elements. At operation of a side safety cushion the front seat is replaced in completely (work HUNDRED).


 PERFORMANCE ORDER

  1. Cast away an external cover of a guide (1).

Overlay of a guide

  1. Turn out screws of fastening and remove a slip (arrows).
  2. At the corresponding complete set separate the socket of an electrical wiring of heating of a seat.

Socket of an electrical wiring of heating of a seat

Before removal of a seat remove the safety fork which is on the end of a mechanical natyazhitel of a seat belt, insert a fork into the opening provided for this purpose in a natyazhitel (shooter)! Thanks to it involuntary operation of a natyazhitel is excluded.

Removal of a safety fork of a seat belt

  1. Shift a front seat forward and turn out two bolts of fastening from its guides.

Fixture of guides

  1. Shift a seat back.
  2. Shift a seat guide forward and take out a seat from forward holders up.

Forward holders of a seat

  1. Pass M8 tap two carving openings under bolts of fastening of a seat in the car bottom. Clear bolts a wire brush and apply the fixing sealant 90 167 347 or 15 10 177 on their carving.
  2. Installation is made upside-down. Bolts of fastening of a seat tighten 20 Nanometers with effort.