13:11. Removal and installation of a loker of a wheel arch

 PERFORMANCE ORDER

  1. Weaken bolts of fastening of a forward wheel, a front of the car and establish to a poddomkratta it on props. Remove a forward wheel.
  2. Give plastic nuts of the fixing screws.

Fastening of a loker of a forward wheel arch on models, except Tigra
1 — Plastic nuts
2 — Clamps
3 — Bolts

Fastening of a loker of a forward wheel arch on models, except Tigra
1 — Plastic nuts
2 — Clamps
3 — Bolts

  1. Turn out fastening bolts.
  2. Take out clamps. In clamps there are small fingers which should be beaten out previously the corresponding drift.

Fingers and clamps can be reused.

  1. Remove a loker of a wheel arch.
  2. Installation is made upside-down.