14:15. Removal and installation of a headlight


  1. Disconnect a negative wire from the battery.
  2. Remove an overlay of a front bumper (see the Head Kuzov).

At removal only of one headlight it is possible to give fixture of an overlay of a bumper only from the relevant party, and then to unbend a slip if necessary.

  1. Turn out bolts of fastening (arrow) of a headlight. On an accompanying illustration the CORSA and COMBO models are shown. On the Tigra model it is necessary to arrive similarly taking into account that the central bolt is slightly above.

Bolts of fastening of headlights of the Corsa and Combo models

  1. On the Combo and Corsa models take out a headlight forward
  2. On the Tigra model turn out the lower bolt of fastening of a headlight and take out a headlight forward.

Lower bolt of fastening of a headlight of the Tigra model

  1. Separate sockets from a headlight and a parking lamp (Tigra model), the index of turn and э / the motor of adjustment of range of light.
  2. Remove э / the motor of adjustment of range of light.
  3. Installation is made upside-down.
  4. In conclusion check adjustment of headlights.