Армен Меружанович S8

14:33. Removal and installation of an electric motor of a back screen wiper

 PERFORMANCE ORDER

  1. Mark with an adhesive tape the provision of a brush of a screen wiper on glass for the subsequent installation.
  2. Cast away a protective cover of the lever of a back screen wiper and give a nut. Remove the lever and the remote plug.

Nuts of fastening of the lever of a back screen wiper

  1. Give a nut (shooter) on a screen wiper axis. On the Tigra model the nut is closed by a cover - remove it.
  2. Turn out screws of fastening of internal facing of a door of a back and remove it (see the Head Kuzov).
  3. Separate the socket э / the screen wiper motor.
  4. Turn out fastening screws э / the motor on the holder and disconnect a weight wire.
Fastening screws э / motor of a back screen wiper and wire of the weight (Corsa and Combo model)
Fastening screws э / motor of a back screen wiper and wire of the weight (Tigra model)
  1. If the motor is installed new э/, install it in position of the parking. For this purpose connect the socket and start э / the motor. Then stop it the switch of a screen wiper and let's it come to final situation.
  2. Install all being removed components.