- Disconnect a negative wire from the battery.
- Remove both central deflectors.
- Remove the handle of the switch of the modes of the fan.
- Remove the switch of the anticreeping alarm system.
- At the corresponding complete set take out a suitable hook the switch of heating of a front seat.
- Remove the air ventilation mode switch handle.
Removal of the handle of the switch of the modes of ventilation
- Remove an overlay of the switch of the mode of ventilation of air.
Removal of an overlay of the switch of the modes of ventilation
- Turn out screws of fastening (1) and take out the control unit panel.
Screws of fastening of the panel of the control unit of a heater
- Disconnect cables (1, 2, 4, 5) from the control unit and separate the electrical wiring socket. Extend the socket (3).
Cables (1, 2, 4, 5) and socket (3) of the control unit
- Turn out screws of fastening (2). Disconnect the control unit and the case of deflectors from the panel, having wrung out clamps (1).
Screws of fastening (2) and clamps (1) of the control unit
- Installation is made upside-down. Establish drafts of gates in compliance with an illustration.