1. Remove a heater fan casing, э / leave the motor of the fan in a casing.
2. From salon separate the socket located to the right of a steering shaft from a fan casing (the additional resistor).

Electrical wiring socket arrangement

3. Turn out the screw of fastening (1) of the additional resistor from a motive compartment.

Screw of fastening (1) and sockets (2) of the additional resistor

4. Separate two sockets (2). Pay attention to various width of plugs: the plug of a brown cable has width of 7.7 mm, and plugs of black and red cables - width of 6.3 mm
5. Installation is made upside-down.