9.2. Adjustment of the mechanism of the choice of transfers

Shutdown of the rechargeable battery in position "P" of the lever of the selector will lead to blocking of the last. For release of the lever it is necessary to remove accurately from the central console the sealing element established around its basis, then the small screw-driver with a flat sting to wring out a lock uvula to the left of the selector lever.

Removal of blocking of the lever of the selector

 PERFORMANCE ORDER

  1. Translate the selector lever in salon from extreme forward situation in extreme back, and make sure of compliance of serially chosen provisions to indications of the indicator, - in case of need the required adjustment.
  2. Install the lever in situation "P".
  3. For the purpose of ensuring access to a cable of the choice of transfers remove the rechargeable battery with the adjusting pallet (see the Head Sistemy of electric equipment of the engine).
  4. Find from above on a transmission case a basic arm of fastening of a cable of the choice of transfer release from it a tip of the last, having accurately extended a clamp.

For an otpuskaniye of a tip of a cable it is necessary to shift a clamp

  1. Make sure that the lever of the selector is in situation "P", then deploy the executive lever on a transmission case forward against the stop, having switched by subjects AT to situation "P" Having latched a clamp, record a cable of the choice of transfers in this situation.

For transfer of AT to situation "P" it is necessary to deploy the executive lever (1) on transmission against the stop forward

  1. Establish and connect the rechargeable battery, then check serviceability of functioning of the selector, - in case of need repeat adjustment.