3.26. Check of adjustment of a pedal of coupling

Check

Adjustment of coupling has to be carried out on the Corsa and Tigra models without automatic adjustment. In process of wear of coupling the pedal moves up.


 PERFORMANCE ORDER

  1. Measure and write down distance (A) from the lower edge of a steering wheel to the center of a pedal of coupling.

Distance (A) from the lower edge of a steering wheel to the center of a pedal of coupling

At the same time do not press a pedal of coupling.

  1. Press a coupling pedal against the stop and again measure and write down distance (B) between the center of a pedal and the lower edge of a steering wheel.

Distance (B) from the lower edge of a steering wheel to the center of a pedal of coupling

  1. The difference between two measurements (In - And) has to make 135 ÷ 145 mm. Otherwise it is necessary to adjust the coupling drive.

Adjustment

 PERFORMANCE ORDER

  1. Remove a lock bracket from a carving bar.

Lock bracket

  1. Adjust the pedal course by means of a carving element of a cable.
  2. Check the provision of a pedal and if necessary adjust it again.
  3. Establish into place a lock bracket.

After correctly carried out adjustment of a pedal of coupling it is always located slightly above a brake pedal. The parallel arrangement of pedals is incorrect.