14:12. Replacements of glow lamps of devices of external lighting

Before replacement switch off ignition and the switch of the corresponding lamp.

Forward parking fires and indexes of turn of the Corsa and Combo models

The procedure of replacement of lamps of forward parking fires and indexes of turn on the Tigra model is described in the Section Replacement of Glow Lamps in headlights, parking fires and forward indexes of turn of the Tigra model.

 PERFORMANCE ORDER

  1. For ensuring access to a right headlight remove an air inlet sleeve (see the Head of the Power supply system, release and decrease in toxicity of the fulfilled gases).
  2. Separate the socket on a lamp socle.
  3. Press a cartridge of a lamp to a reflector, release it turn to the left and take out from a reflector.
Replacement of a lamp of forward parking fire
Replacement of a lamp of the forward index of turn
  1. Take out a lamp from the boss.
  2. Insert a new lamp into a cartridge.
  3. Insert a cartridge into a reflector and record a cartridge turn to the right.
  4. Connect the socket.
  5. When replacing a lamp of forward right parking fire or the index of turn insert an air duct into the air filter and record its sleeve, having turned a clamp on the 90th hail.

Side repeater of turn

 PERFORMANCE ORDER

  1. Carefully hook the case of the lens of the side repeater of turn by a plastic wedge or the screw-driver wrapped by rags and separate it from a forward wing. Separate the socket.

Removal of the side repeater of turn

  1. Take out a cartridge from the lens.
  2. Press a lamp into a cartridge, turn it to the left and take out.
  3. Insert a new lamp into a cartridge and fix it by turn to the right. Connect the socket.
  4. Insert a cartridge in the lens and press the last into a forward wing.

Fog light

 PERFORMANCE ORDER

  1. Separate the socket from below of a headlight, at the same time press a safety hook.
  2. Open a headlight cover turn to the left, and disconnect a wire (1).

Wire (1), stopper (2) and lamp (3) of a fog light

  1. Press a spring stopper (2) towards a headlight and up, then open to the left.
  2. Replace a halogen lamp (3).
  3. Establish a spring stopper, connect a wire.
  4. Record a cover turn to the right.
  5. Connect the socket.

The back combined lamp

 PERFORMANCE ORDER

  1. Open a cover in the luggage compartment for what extend stoppers On the Tigra model for this purpose open rotary locks.

Opening of a cover of the luggage compartment

  1. On the three-door Corsa model and on the Combo model squeeze both lock levers and take out a reflector from a back lamp.

Lock levers

  1. On the five-door Corsa model press on the fixing lever down and take out a reflector from a back lamp.

The fixing lever

  1. On the Tigra model squeeze lock pads of the holder of a lamp on the right and at the left and take out the holder of a lamp.
  2. Press a lamp into a cartridge, turn it to the left and take out.
  3. Insert a new lamp into a cartridge and turn it to the left.
  4. Insert a reflector into a back lamp.
  5. Close a cover and record it.

Lamp of illumination of registration plate

 PERFORMANCE ORDER

  1. On the Corsa and Combo models take out by means of the screw-driver a lamp of lighting number of a bumper.

Extraction of a lamp of illumination of registration plate

  1. On the Tigra model press the acting level of a lamp of illumination of registration plate to the center take out a lamp from a bumper.
  2. Press a side lock pad and remove the lens.

Removal of the lens

  1. Press a lamp into a cartridge, turn to the left and take out.
  2. Insert a new lamp into a cartridge and turn it to the left.
  3. Establish the lens and record a lamp in a bumper.