7.2.7. Removal and installation of the control unit of DIS ignition

The control unit of ignition of DIS is located on a head of cylinders from a flywheel. It contains two dual coils of ignition, and also the ignition signal shaper.


 PERFORMANCE ORDER

  1. Disconnect an electrical wiring from the control unit of DIS ignition.
  2. Turn out three bolts of fastening of the control unit of DIS ignition to a camshaft bed.

Bolts of fastening of the DIS block

  1. Install the control unit of DIS ignition on a bed of the camshaft and tighten block fixture with effort of 8 Nanometers.
  2. Connect an electrical wiring at the control unit of DIS ignition.