- In interior of the car, for the purpose of ensuring access to pedal assembly, release fixture and remove the left (driver's) lower section of finishing of the dashboard.
- Release a gas cable tip from an accelerator pedal.
- Give three fixing nuts and remove pedal assembly from a partition of a motive compartment
Three bolts of fastening of pedal assembly
- Check components of pedal assembly for existence of signs of wear and mechanical damages, replace the failed elements. For dismantling of pedal knot, unhook a spring, shift a clamp and remove a pedal, a basic arm, a returnable spring and axial plugs, - before installation grease plugs and an axis of a pedal with universal lubricant.
- Establish on an arm of the plug and a returnable spring, having passed through a spring, establish a pedal. Fix a pedal by a clamp and pick up to it a spring.
- Establish pedal assembly on the regular place and tighten fixing nuts with the required effort.
- Connect a gas cable to a pedal, check reliability of landing of the plug through passage, then establish into place finishing section of the dashboard.
- In conclusion make adjustment of a cable of gas (see the Section Replacement and adjustment of a cable of the drive of a butterfly valve).
|