4.4.6. Replacement of an epiploon of the camshaft

 PERFORMANCE ORDER

  1. Remove a camshaft cogwheel (see the Section Removal and installation of cogwheels of the GRM drive).
  2. Accurately punch or drill couple of small openings in which screw two self-tapping screws in a firm face surface of an epiploon. Having grasped with flat-nose pliers heads of self-tapping screws, take an epiploon from the landing nest.

Extraction of an epiploon of the camshaft

  1. Smooth out walls of a landing nest of an epiploon, having removed from them the small jags and roughnesses capable to lead to an exit of a new epiploon out of operation.
  2. Grease sealing sponges of a new epiploon with pure motive oil and by means of a cylindrical mandrel press and press an epiploon in a nest aflush with a head surface (sponges inside), - rest a mandrel against the rigid outer edge of a face surface of an epiploon, try not to damage working edges.

As a mandrel it is possible to use a replaceable face head of the suitable size, or a piece of a pipe of suitable diameter.

  1. Establish into place a camshaft cogwheel (see the Section Removal and installation of cogwheels of the GRM drive).