Opel Corsa B - the Repair manual and operation
1. Instruction
2. Governing bodies and methods of operation
3. Settings and routine maintenance of the car
3.1. Schedule of routine maintenance
3.2. General information
3.3. General information about settings and adjustments
3.4. Checks of levels of liquids
3.5. Check of a condition of tires and pressure of their rating, rotation of wheels
3.6. Replacement of motive oil and oil filter
3.7. Check of a state and replacement of a belt of the drive of auxiliary units
3.8. Removal of a sediment from the fuel filter of the diesel engine
3.9. Check of a state and replacement of the hoses located in a motive compartment
3.10. Check of a condition of components
3.11. Check, service and charging
3.12. Check of a state and replacement of brushes
3.13. Check of system of production of the fulfilled gases
3.14. Check of the brake system
3.15. Check of electric equipment
3.16. Control of a condition of an anticorrosive covering of a body and bottom of the car
3.17. Check and adjustment of turns of idling and maximum turns
3.18. Replacement of the filtering element
3.19. Check and service
3.20. Replacement of the fuel filter
3.21. Check of composition of the fulfilled gases
3.22. Greasing of locks, loops and emphasis
3.23. Survey of components of a suspension bracket
3.24. Check and adjustment of valvate gaps on the diesel engine
3.25. Replacement of spark plugs
3.26. Check of adjustment of a pedal of coupling
3.27. Replacement of brake fluid
3.28. ATF replacement
4. Engines
5. Cooling systems of the engine, heating of salon and air conditioning
6. Power supply systems, release and decrease in toxicity of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual 5-staged box of gear shifting
9. Automatic 4-staged transmission
10. Coupling and power shafts
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
3.28. ATF replacement
PERFORMANCE ORDER
Merge ATF in suitable capacity.
Replace a sealing ring of a drain stopper and tighten a stopper with effort
of 15 ÷ 20 Nanometers.
Fill in about 5.0 l of fresh transmission liquid and check the ATF level.
Do not pour out ATF and do not mix it with household waste.